 |
|
| INTERIOR CUTTING DIES |
 |
| Assemble Plates |
back
| next |
| Remove all remnants of the layout fluid
from the bottom plate and the punch piece. Loosely assemble
the two plates together with the two 10-32 screws and
one set of nuts. Apply a small amount of Loc-tite®
to the 4-40 screw threads as well as to the back of the
punch piece. Place the loose punch piece in the die, and
insert the screws through the bottom plate. Tighten securely.
(Loc-tite® is a type of glue that acts like a lock
washer to prevent the screw from coming out.) |
|
| Download
Catalogue |
|
