Hydraulic Die Forming Discussion Group
Picture of pin.
Ken Gastineau
gastin@mis.net
This is an example of the pin that was coined in the aforementioned die. 22 gauge red brass and it was mass finished. Approximate size one inch.Ken Gastineau
Coined brass pin.
![[ Previous ]](../ceilidh-icons/ceil_prv.gif)
![[ Next ]](../ceilidh-icons/ceil_nxt.gif)
![[ Index ]](../ceilidh-icons/ceil_ind.gif)
Sun Nov 17
![[ Reply ]](../ceilidh-icons/ceil_rep.gif)
![[ Edit ]](../ceilidh-icons/ceil_edt.gif)
![[ Delete ]](../ceilidh-icons/ceil_del.gif)