Hydraulic Die Forming Discussion Group
Coining in a 150 ton press
Phil Poirier
poirier@newmex.com
Here's a photo of 3.4 square inches of 18kyg, coined to a depth of .008" using all the force of the 150 ton press.
The 18kyg sheet was only .020" thick, a tough test.....coining thicker metal is easier and requires less pressure.
Have a safe and FUN trip Lee!!
Phil
![[ Previous ]](/ceilidh-icons/ceil_prv.gif)
![[ Next ]](/ceilidh-icons/ceil_nxt.gif)
![[ Index ]](/ceilidh-icons/ceil_ind.gif)
Tue Aug 20
![[ Reply ]](/ceilidh-icons/ceil_rep.gif)
![[ Edit ]](/ceilidh-icons/ceil_edt.gif)
![[ Delete ]](/ceilidh-icons/ceil_del.gif)